BRIZ

Connection setup (socket)

Allows to configure socket connetction.

• Name - name of connection
• Start sequense - here the script of connection is entered - the sequence of symbols transmitted on a server at connection, for example : dm\w\ndm\n .Where \n designates Enter and \w is pause. See Sequence format description.
• Stop sequense - Here the script of switching-off  is entered - the sequence of symbols transmitted on a server at switching-off. See Sequence format description.
• CommandLine - commands in CommandLine format that will be executed after connection.
• Connection info - Here the name is entered (blanks are supposed), which will appear in heading of a window of the terminal and in the menu <To begin a new session>.
• Program title - default text of terminal caption
• MessageBox title - default text of MessageBox caption
• ErrorBox title - default text of ErrorBox caption
• Hide terminal window - hides terminal window when connected through this connection.
• Disable Alt hotkeys - Enables/disebles predefined keys, such as Alt+C, Alt+B, Alt+S, Alt+X ...
• Use Telnet flag enables telnet protocol emulation.
• Auto CR/LF flag converts single CR or LF to CR/LF
• Disable Events Echo flag hides server echo outputs on client events.
• Disable shutdown - disables shutdown during connection
• Shutdown PC after closing of terminal. See shutdown options in ExitWindowsEx
  • LOGOFF
  • POWEROFF
  • REBOOT
  • SHUTDOWN
  • FORCE_LOGOFF
  • FORCE_POWEROFF
  • FORCE_REBOOT
  • FORCE_SHUTDOWN
  • FORCEIFHUNG_LOGOFF
  • FORCEIFHUNG_POWEROFF
  • FORCEIFHUNG_REBOOT
  • FORCEIFHUNG_SHUTDOWN
  • LockWorkStation
• Terminal - type of terminal that used with this connection.
• Rows - number of rows on screen
• Columns - number of columns on screen
• IP address - address in forms NNN.NNN.NNN.NNN or \\myservername
• PORT - server port. By default for telnet is 23.
• Init delay - used for customisation of connection initialisation.
• Disable Events Echo-  flag hides server echo outputs on client events.
• SSH - turn on SSH or SSH2 protocol. You can adjust SSH by SSH Setup.

Delemiters

Sets additional chars conversion. "Output" codes are using for extraction of fields.